6HK1X

Download Spec Sheet

  • 6 Cylinder, 4 cycle, water cooled, OHC, vertical inline, turbocharged, CAC, common rail injection
  • 4.527”x4.921” bore & stroke (115 x 125mm)
  • Engine displacement: 475 cu. in. (7.8L)
  • Compression ratio: 17.5:1
  • Dry weight: 1650 lbs. (748kg)
  • 51.90” long by 28.20” wide by 42.60” tall
  • Coolant capacity: 7 gal. (26.5l)
  • Lube oil capacity: 40.2 qt. (38l)
  • Engine rotation is counter clockwise from flywheel
  • Radiator with charge-air cooler
  • 12V-110A Alternator with internal voltage regulator
  • 12V – 3.0 kw starter
  • Upward exhaust outlet
  • Turbocharged & CAC
  • SAE #2 11.5 flywheel housing (with metric threads)
  • Oil pan with 35 degree inclination (all directions)
  • Electronically controlled common rail fuel system
  • Fan with 33.46” (850mm) suction
  • Skid base
  • Donaldson dry air cleaner
  • Enclosed instrument panel with Murphy “Power View” display (with low oil pressure and high water temperature shutdowns)
  • Diagnostic light and diagnostic port
  • Throttle control and start switch
  • Murphy 518
  • Curved exhaust pipe
  • Battery cables
  • Engine shipped with oil and coolant (Pre-run)

Optional Equipment

  • L150 Sight Water Level Gauge
  • Engine Hood, Enclosure
  • Auxillary Front Pulley
  • Drive Plate, #41-48
  • PTO Clutch (2 ¼” shaft)
  • PTO Flange #41 Spicer (Installed)
  • Irrigation - Generator Mounting (Complete with belts and generator pulley)
  • Irrigation - Generator Slides Only
  • Adjustable Engine Stands
  • Trailer, 6’ (with 2 mounting rails and new tires, assembled, “off highway only”)
  • Drain Hose
  • Muffler